Electrically heated hoses are designed for optimum transfer of non-explosive liquids or gases. Our Teflon lined stainless steel braided heated flexible assemblies regular
pressure or high pressure transfer hoses are used in a wide range of applications.
|
|
|
|
Smooth bore Teflon core with stainless steel
overbraid
Heavy duty abrasive resistant outer covering,
polyester braid
Optional water resistant jacket
Heat shrink tube end caps
Male NPT or JIC female swivel fittings are standard
Stainless steel
Plated carbon steel
Temperature sensors – thermocouples or RTDs can
be built-in
Hose assemblies available in 120 and 240 Vac
Ground connection to stainless steel overbraid
|
Adhesives
Bulk transfer
Chemical transfer
Food products
Gas analyzer systems
Hot melt systems
Hot oil lines
Paint systems
Petroleum products
Steam transfer
Tar and asphalt
Water and waste disposal
Waxes – candle making
|
Hand assembled
Teflon smooth bore core
Stainless Steel overbraid
Layer of self-vulcanizing silicone bedding tape
Resistance Wire pre-wrapped with insulation
Wound felt insulation to maintain consistent heat
transfer
Wrapped in tape
Standard hose cover is abrasion resistant polyester
braid
Optional outer cover for water resistance
Heat shrink end caps
Specified hydraulic fittings
Electrical connectors
Optional built-in sensors including RTDs,
Thermocouples
|
ELECTRICALLY HEATED HOSES
- Our high temperature hoses feature a built-in electric heating element that provides heat up to 450 degrees F (232 degrees C).
- The TFE Teflon core is reinforced with a tin/copper overbraid
- Construction includes thermal insulation and scuff resistant jacket.
- Available with most standard couplings, they are supplied hydraulically and electrically complete.
- They offer flexibility, durability, chemical inertness and high resistance to corrosion over their entire temperature range
STAINLESS STEEL BRAIDED HOSES
- We offer a heated line with a dense stainless steel braid for higher working pressures and durability along
- TFE Teflon* core heating element and electrical insulation.
- Flexible braiding and teflon core increase durability and ease of handling
- Helical convoluted teflon core
- Reinforced stainless steel wire braid
- Designed to operate up to 400 degrees F (204 degrees C)
- Double thermal insulation and high resistance to corrosion
- Available with most standard couplings
- Supplied hydraulically and electrically complete.
ELECTRICALLY HEATED RUBBER HOSES
- Core materials compatible with product being conveyed including EPDM, SBR and neoprene
- Feature built-in electric heating element, machine-wound to close tolerances to assure uniform heating and efficient transfer of thick, viscous substances
- In most freeze protection applications, thermal insulation is not required, eliminating a compressible exterior surface and adding to overall durability
- Durable, scuff-resistant jacket
- Available in any length up to 1000 feet with one voltage input, and are supplied hydraulically and electrically complete, ready for use
- Water and waste treatment plants
- Dust suppression systems for bulk transfer of coal, iron ore, limestone and other commodities being conveyed in cold climates.
- Mild acids and chemical transfer
- Recreational parks and vehicles
- Liquid sugar, animal fats, vegetable oil and other food by-products.Please note: FDA approved cores are used in all food handling and potable water applications
- Chemicals and petroleum products
- Tars and asphalt
- Urethane coatings and packaging
|
ELECTRICALLY HEATED STAINLESS STEEL HOSES
BENDABLE ELECTRICALLY HEATED STAINLESS STEEL HOSES
- Bendable smooth bore stainless steel tube for use in fixed applications where tubing needs to be bent to the desired configuration and where flexibility is not required.
- Built-in electrical heating element provides temperatures up to 600 degrees F (315 degrees C).
- Electrical insulation features a polyimide film with excellent dielectric properties.
- Standard double high temperature thermal insulation
- Durable scuff resistant jacket
- 1" bare tubing on each end
FLEXIBLE ELECTRICALLY HEATED STAINLESS STEEL HOSE
- Flexible stainless steel convoluted core for use in applications where limited flexibility is required
- Non-rigid connections for conveying liquids, gases and semi-solids at temperatures up to 500 degrees F (260 degrees C)
- Available with JIC female, MNPT, or tube ends
- Available for temperatures up to 1100 degrees F
- Greater flexibility due to unique constructions
- Built-in electric heating element
- temperatures up to 450 degrees F (232 degrees C)
- Fiberglass reinforced silicone rubber insulation
HEATED EMISSIONS SAMPLE LINES
USAGE
- Emissions testing
- Gasoline engine and diesel engine development,
- US EPA diesel engine certification,
- On-road testing and certification.
- Dynamometer Labs,
- Test Cells,
- On-Road Certification,
- CEMS Sites
- AC 50-60 HZ or DC operation
- Sensor: Thermocouple, RTD, Internal Thermostat or other
- Replaceable Sample Tubes
- Material: Teflon, Stainless Steel or other
- Lightweight flexible design
- 1/8” to 1” ID Sample Tubes
- Optional Exteriors
- Light-weight end treatments made from high-temperature phenolics
- Optional plated steel
- Operational temperatures in excess of 200 C
- Suitable in extreme environments
- Exteriors suited for direct burial, outdoor use, hazardous locations, cold rooms, extreme temperatures
- Easy to repair with replaceable tubes, end caps and end fittings
- All of our heated products are backed by a 2-year limited warranty
|
|
