Quality Industrial Grade Electrically Heated Potable Water Hoses
- Braided polyester monofilament outer sleeve will not tear
- Resistant to ultraviolet rays
- Fire Resistant
- High Purity LLDPE Water Hose Core - non-contaminating food grade hose
- Ideal for food, water and beverage transfer
- FDA - material complies with 21 CFR 177.1520 (c) 3.1 (b)
- NSF - hose is listed under Standard 51 (plastics, materials, and components used in food
equipment) for contact up to 125° F and under NSF-61 for transfer of drinking water up to a
temperature of 87° F.
- Contains no substances designed as hazardous under California Proposition 65
- Standard 3/4" fittings
- UL rated waterproof heater circuit spirally wrapped around a heavy-duty rubber hose
- Thermally insulated core
- Lengths 7, 15, 25, 50, 75, 100
- Custom Lengths available
- Temperature 10 - 140° F
- Size Code 12
- Nominal ID Size 3/4 in (19 mm)
- Nominal OD Size 1.125 in (28.6 mm)
- Max Working Pressure at 70° F200 psi
- Max Working Pressure at 122° F100 psi
- Heat Trace Micro Self-Regulating Heater Cable Electric heating cable for frost protection or
temperature maintenance of instrument lines and pipe work in safe or hazardous
locations.
- Industrial grade self-limiting heater
- Operates on 120VAC normal house current
- Will not overheat or burnout
- Draws 1.5A per 25 foot house length
- Power output is self-regulated in response to the hose temperature
- Max Temperature 65° C (149° F)
- Min Installation Temperature-40° C (-40° F)
- Power Supply 100 - 120 VAC
- Temperature ClassificationT6 (85° C)
- Max Resistance of Protective Braiding 18.2 Ohm/km
- CENELEC
- ATEX
- IEC
- FM
- SEMKO
- CSA
- Lloyds Register
- Foam Seal Industrial PVC Foam
- Engineered to provide a cost-effective solution to your most demanding sealing and
cushioning requirements.
- This closed cell polyvinyl chloride foam can be produced with or without adhesive.
- Remains flexible at -20° C to 80° C
- Resistant to most solvents and chemicals
- Fire resistant per FMVSS 302
- Ultraviolet resistant
- Seals out light, air, dust, and moisture
- Cushions against vibration and noise
- Does not absorb moisture
- Thickness 1 / 16" to - 1"
- Density 11 lbs./cu. ft.
- Shore Hardness 43
- Force to Compress 7.0 psi
- Compression Deflection 4.0 psi
- Tensile Strength 40 psi
- Elongation 150%
|
